Excellent heat resistance
Vispeek® series |
Tg (ºC) |
Tm (ºC) |
HDT (ºC) |
9-PEEK |
143 |
343 |
>330 |
HT9-PEEKK* |
161 |
367 |
>330 |
ST9-PEDEKK* |
183 |
409 |
>330 |
*In development
• Outstanding friction and wear resistance
• Excellent chemical resistance
• Excellent resistance to hydrolysis
• Good intrinsic flame retardancy
• Little smoke and toxic gas release during combustion
• Low water absorption, resulting in high dimensional stability
• Good electrical performance
• Good processability
Automobile
· Machinery and equippment
· Electronics and semiconductors
· Cable
· Coating
Grades |
Description |
Vispeek® 9001AP |
Low viscosity, unreinforced, fine powder, UL94 V-0 at 0.75~3.0 mm, for powder coating |
Vispeek® 9002P |
High viscosity, unreinforced, powder, UL94 V-0 at 0.75~3.0 mm, for extrusion and compression molding |
Vispeek® 9003P |
Standard viscosity, unreinforced, powder, UL94 V-0 at 0.75~3.0 mm, for extrusion and compression molding |
Vispeek® 9002G |
Medium viscosity, unreinforced, granule, UL94 V-0 at 0.75~3.0 mm, for extrusion and injection molding |
Vispeek® 9003G |
Standard viscosity, unreinforced, granule, UL94 V-0 at 0.75~3.0 mm, for extrusion and injection molding |
Vispeek® GR9103 |
10% GF reinforced, UL94 V-0 at 0.5~3.0mm, for injection molding |
Vispeek® GR9303 |
30% GF reinforced, UL94 V-0 at 0.5~3.0mm, for injection molding |
Vispeek® CF9202 |
20% CF reinforced, UL94 V-0 at 0.5~3.0mm, for injection molding |
Vispeek® CF9303 |
30% CF reinforced, UL94 V-0 at 0.5~3.0mm, for injection molding |
Vispeek® FG9303 |
10% CF and 10% graphite co-reinforced, plus 10% PTFE |
Vispeek® 9003E3 |
Antistatic, for extrusion and injection molding |
